<table border=“0” width=“100%” cellspacing=“0” cellpadding=“5” bgcolor=“#FFFFFF”>
<tbody>
<tr bgcolor=“#FFFFFF”>
<td>Hi all,
I’ve tried use “contact us” but the mails i’ve tried to sent just pings back, so i ask here instead.
I’m about to buy my first weps here in Sweden. And I’m trying to figure out if i should go for gen 2 pro pack 2 or a gen 3 pro. My question is, can the gen 3 with the standard jaws, clamp my Fallkniven S1 (About, 4.9-5mm bladethickness) or do i have to buy the bigger jaws for it? If thats the case i will go for the gen 2 pro pack 2, because i can’t afford more than the price of the gen 3 pro as it is.
Greetings
Erik Ring
Sweden</td>
</tr>
</tbody>
</table>
I believe that 5mm is 3/16 if that is so then that would fit the standard gen 3 jaws. In fact 3/16 is 4.7625 mm so I’m not sure it would work. <b></b>
Hi,
Thanks for a quick answer.
I used a inch to metric converter and got the answer that 3/16 is about 4.76mm. So tthats why i’m asking here. I hope someone here have tried to clamp a s1 or another 5mm knife hehe 
I believe they have a larger jaw.Which allows 1/4" spine.
I said in the original post that i can’t afford a bigger jaw, thats out of my budget.
GasDoc, yeah I know about the stones and cube. There is plenty of angle apps that is accurate so I’m gonna use that until i have cash over for a cube 
So I think you have answered your own question. Gen 3 won’t work without accessory jaw. The Gen 2 pro pack 2 is the answer.
The Gen 3 is the one I bought but I do not have thicker knives like yours. I am very happy with the Gen 3 but I probably would have been happy with either version.
Either way if you change your mind after buying the Gen 2 you could get the Gen 3 replacement vice.
Good luck and I truly believe you will be happy either way.
Hey Ringen,
First, welcome to our forum! Good to have you join us!
Let’s run some numbers:
You stated your Fallkniven S1 is about 4.9-5.0mm in blade thickness.
4.9mm = 0.192913 inches
5.0mm = 0.196850 inches
The Gen 3 Pro with standard jaws maximum blade width is 3/16 inch = 0.18750 inches.
In either case, your Fallkniven S1 will not fit within the standard jaws of the Gen 3 Pro.
Hope this helps you with your decision.