lvarner

[lvarner]

Interested.

Any idea of shipping charge to Farmville,  Va,  23901.

Thanks

1 user thanked author for this post.

Orben Bounds

[lvarner]

Hello.  Interested.  Would love to see photos of all that is included.  How much asking?

Thanks

[lvarner]

Marc H (Wicked Edge Expert Corner) wrote:

I wouldn’t think so. The Tormek holds the knife out in front and away from the vise allowing very low guide rod angle settings where the stones won’t contact the vise. You should be fine without the LAA.

Using the Tormek jig,  would it matter which WE to purchase, ie GO, 100 or 120?

Thanks

[lvarner]

Marc H (Wicked Edge Expert Corner) wrote:

Your knives look as though you could hold them in the Tormek Small Knife Holder then clamp the holder in the Wicked Edge jaws for sharpening. That would help you achieve the low bevel angles you stated you wanted to sharpen these knives at. Without utilizing the Tormek Small Knife Holder I don’t believe you can use the Wicked Edge for your knives.

Thanks Marc.  I have the Tormek holder.  Would I need the WE low angle adaptor also?

[lvarner]

Marc H (Wicked Edge Expert Corner) wrote:

If you can post photos of your personal wood carving knives it may help. I’m making a recommendation based on google photos. Possibly your knives are shaped differently.

Here are several.

Thanks

Attachments:

You must be logged in to access attached files.

1 user thanked author for this post.

Organic

[lvarner]

Marc H (Wicked Edge Expert Corner) wrote:

I am as brand loyal to WEPS as any one here. I will tell you just what I told the last guy posting the same question, There are other sharpeners better suited for the small and intricate blade edges and various knife shapes seen in wood carving knives. Many have a knife end blade similar to a chisel while others have curved small scalpel like blades and curved handled offset blades. The Wicked Edge Chisel adapter maybe helpful for sharpening some of these style knives. if it were available at this time. I think a Tormek Sharpener may be better suited for your needs: https://www.tormek.com/uk/en/user-categories/woodcarving/

Thanks.

Already have Tormek.  Was looking for something to give consistent reproducible low angle grind on knives.

[lvarner]

Thanks.  That item is backordered at present.

I am actually using knives,  but at a low angle.

[Author]

Posts