James

SOLD

I have included photos to verify you have the same vise model in the pictures.  The vise uses the hex key to lock the jaws.  All W.E. models use the same guide rods.  The only difference is rod length.

I’m asking $75 for used the Low Angle Adapter and the 12″ guide rod pair. Shipping in CONUS is included in asking price.

Please PM if you ar…[Read more]

Which model sharpener? A photo would be helpful to confirm I have what you need.

Here’s a deal.  I picked up one as a backup a couple months ago.  Other than the “Refurbished” sticker you’d think it was new:

eBay Plugable Scope

He describes it nicely:

Timm, I have two Bunka knives.  they both are sharp in the tip. Here’s a website you can look at that selection. All the models are sharp at the tip.

Some of us are using this scope holder accessory with the Pluggable Scope.  It takes all the focusing issues/problems away.  Now, where I set it, it stays until I choose to re-adjust the focus ring. This scope accessory was devised for hand-held scope use.

Here’s a couple edge photos taken hand-held. They are of the bevel and tip at high power b…[Read more]

The style is Wa Bunka. It’s a nice enjoyable style to use.  It’s a cross between a Gyuto, chef’s knife, and a Santoku, multipurpose knife.

Ed K’s wife may be able to read the Kanji to help identify the brand.

From the looks it’s a high carbon steel like blue #2 or Aogami Super.  Those steels are hard but sharpens nicely with the W.E. diamond s…[Read more]

Welcome to the W.E. Forum, Joe.

I am another user and fan of the inexpensive Plugable 2.0 USB scope from Amazon.  I’ve bought and used probably 8   or 10 different scopes over the years and it’s still my favorite one to use.  Quick and simple for my hand-held method for edge inspections.

Using a scope for inspecting your sharpening progress and…[Read more]

Yes, sold.

Magnets seem like a good idea but they do not fare well once they start collecting fine steel dust from knife sharpening.   Especially if the magnet(s) are strong enough to hold well and stay where placed. I found the very fine steel dust piles on the magnets and grows like a steel furr ball.  It tends to just push and move around on the magnet as…[Read more]

That boning knife isn’t that big and the blade looks mostly flat in the blade center. I think I would have clamped it so the center flat portion is centered with the jaw and the blade was mostly parallel to the jaw line, with it high up in the jaws so it’s clamped by just the tips of the jaws . That’d be essentially with the tip just lowered a bit…[Read more]

That’s how I had my Gen 3 Pro set up.  Sitting for me is the way to go.

Timm, they have all sorts of things that other W.E users have adapted for similar supporting situations

Some knife companies offer blade replacements for a reasonable price.

With the originally released versions of the Gen 3 cam action vise the vise sides were open exposing the cam itself. That version also used a classic spring for tension. For that version it was prudent to tape up the sides to keep the action clean and free.  The newer Gen 3 vise versions, released since then, have a redesigned vise body that is…[Read more]

For loose abrasives that haven’t come free yet, I’d use a dry nylon scrub brush and a shop vac or compressed air.  The pronounced shedding will stop soon as the stones get better broken in.

Scratches are commonly seen with new systems.  Several issues can contribute to them. First, newer stones just getting broken in tend to shed loose abrasives with use.  New stones can be messy and will get better in short order.  As your working the edge the loose stones can be dragged across the knife side steel.  The loose abrasives can may get…[Read more]