Eric

Eric

Eric replied to the topic Please help a newbie, edge is crap… in the forum Getting Started 6 years, 2 months ago

Leo, first thank you very much for your reply, appreciate that.

If you don’t mind me asking, do you also check the angle between every stone and adjust if it is different? I just am not understanding that part of it. I’m thinking if I start at 26.85, and I reprofile, even if it is only a little bit of the over all height of the blade the angle…[Read more]
Eric replied to the topic Please help a newbie, edge is crap… in the forum Getting Started 6 years, 2 months ago

Thanks for the help, appreciate it.

So a question, regardless what angle I am starting with (staying with this one just to keep it easy though), if I start at 26.85 dps, starting with 800 say, then go to 1000 and check the edge angle and reset 26.85, won’t the angle be slightly different than what I finished with from the 800? I’m thinking even…[Read more]
Eric started the topic Please help a newbie, edge is crap… in the forum Getting Started 6 years, 2 months ago

So I bought a pro pack so that I could do my own knives and not send them back every time they need to be sharpened, but now I’m realizing there is a lot more to sharpening than I originally thought.

So here is what I have done, I found the angle with a sharpie (26.85) and then used a 800 grit stone to get a burr on both sides, then I progressed…[Read more]
Eric became a registered member 6 years, 3 months ago

Forum Statistics