Alex Doherty
Forum Replies Created
-
AuthorPosts
-
10/14/2012 at 4:49 am #6179
Thanks I ordered the 320,400,&600 grit stones just to give them a try. The 1/8 x 1 x 6 inch stones are only about 3 to 4 bucks so I thought I’d give them a go just to see how they do.
10/13/2012 at 1:27 am #6144I was specifically looking at the moldmaster stones they seem to be preferred for a coarse yet refined rope cutting edge or a toothy edc edge. I was hoping for something like the 400/600 grit chosera stones on the cheap. In some of the tests they were used in the coarser stones seem to provide a longer lasting edge. I don’t know this from my own testing but I would like to try. The 400/600 WE diamonds are great but I thought the silicon carbide stones might have a shallower scratch pattern and thus a little more refined edge at that grit. I also wonder how a polished edge taken back to 15 micron cbn on nano cloth would cut. It seems like that would be the ultimate in refined with teeth. Mostly I just like to play with new things but I like to hear what others results are too.
Thanks
Alex09/18/2012 at 7:31 pm #5546I love clenzoil. I use it for everything it’s a great clp and it’s safe for fine wood or plastics. I don’t know if it’s food safe but it works great on the WE stones as well. So far it’s the best all round gun oil I’ve found.
08/25/2012 at 4:01 pm #4982Because only the right side of the clamp is moving the right side angle will be off a little because of the thickness of the knife. The left should be accurate say 20 degrees but you will have to run the right at 21 or 22 to keep the bevels even but how much you have to move it will depend on how thick your knife is. The thicker it is the more you will have to move it. The angle cube helps with this. I hope this helps.
BTW it sounds like the app may be accurate. I’ve also got to ask how do you like the 3V in the Tuff?
08/21/2012 at 7:43 am #4788I’ve always had good luck hand sharpening but I’ve gotten spoiled too by the speed and ease that I can try new things and get repeatable results. That hasn’t always been the case freehand. It takes a lot of the worry out of the process because if you try something and you don’t like it or it doesn’t work out like you thought it is easy to go back to what you know works or try something else. I would upgrade… with his permission of course. 🙂
08/20/2012 at 4:33 pm #4777I think I’ve jumped in head first. I did some reading then I pulled out my benchmade 940 in 154cm and went through the 1600 ceramic stones then I dropped 1 degree and went through the 5 and 3.5 pastes on balsa. I spent a little more time on each step and whoa baby it passed the hht!! Now I’m excited so I got out my spyderco in cpm m4 set it up at b on the top notch at 16 degrees with the angle cube and went to work. I did the same progression on each step I did scrubbing then sweeping strokes then dropped 1 degree and when through the pastes. Oh my does m4 get stupid sharp!!! It passed the hht no problem but it still won’t push cut toilet paper. It does slice paper towel though. Anyway now my wife thinks I’m crazy but she was impressed.
08/20/2012 at 11:24 am #4772Thanks guys for all the help. I’ve got the 1200/1600 stones and the 5/3 micron pastes on balsa. I got balsa instead of leather because I thought I might not round the edge as much but I think I’m going to try the kangaroo with 1 and .5 sprays next and see how that goes. I’m definitely going to have to get a loupe or something to see the edge better too. The list keeps growing. Lol Thanks again. I’ve got a lot of reading to do.
08/20/2012 at 10:04 am #4768Wow! That’s a lot of interesting stuff there and thanks for taking the time to put in the links. I can understand what you mean by OCD. So far tree topping hair is something I can do but hanging hair or toilet paper seems impossible. I would love to be able to pass the hanging hair test but I probably wouldn’t want to use the knife. Do you notice a big difference in the HA or CBN sprays and the WE pastes? Because I was thinking of trying the kangaroo strops next but I was wondering what compound to get.
08/19/2012 at 12:32 pm #4750Sorry if this has been covered and thanks for the help with the search. I’m new to this so I’m still not sure how all of this works but to answer your questions most of my knives are used for edc or in the kitchen. In both cases my personal preference is for a little tooth. On the WE again I’m new but so far the 1000 grit stone followed by the balsa strops with the 5 micron paste has been my favorite all round edge it’s refined enough for some push cutting but still has some bite for slicing. I haven’t had a chance to try the waterstones or the HA sprays yet so I don’t know about them but for what I have right now that is my favorite. I was just curious about what you guys like. Thanks again and please bear with me while I’m learning.
08/17/2012 at 12:15 am #4672Check out Bob Nash at Oldawan.com I think he has them. I just ordered a WE from him and the customer service was awesome.
-
AuthorPosts