New Angle Adjustment Guide
- This topic has 6 replies, 6 voices, and was last updated 04/01/2016 at 8:17 pm by
.
-
I’ve been playing with a new angle adjustment prototype from Wicked Edge…
Basically, you mount the knife loosely in the clamp, place the guide over the knife, dial in the angle you want, and tighten. Remove the guide, then set the guide rods to the dialed in angle, and sharpen as normal.
Works pretty well… I’m measuring angles within .0025 of what I’m setting.
If all goes well… should be out later this summer. Felt it was far enough along, that today would be a good day for a ‘sneak peek’.
Enjoy!
2 users thanked author for this post.
Isn’t that the angle guide off of the Ken Onion Work Sharp?
1 user thanked author for this post.
At first I wondered why Clay would have chosen to have it tested in Australia, but then I remembered; of course! The coriolis effect!
1 user thanked author for this post.
I’ve been playing with a new angle adjustment prototype from Wicked Edge…
You caught me off guard!
I started to look at the picture and tried to figure out how it works! Thanks! What is it actually? Is it related to sharpening?1 user thanked author for this post.
Yes, today is a wonderful day for such exiting news
1 user thanked author for this post.
Isn’t that the angle guide off of the Ken Onion Work Sharp?
Yup…
You caught me off guard!
I started to look at the picture and tried to figure out how it works! Thanks! What is it actually? Is it related to sharpening? Organic nailed it.
- You must be logged in to reply to this topic.