Advanced Search

Inclinometer is off by 1 deg.

Recent › Forums › Main Forum › Inclinometer is off by 1 deg.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 03/11/2023 at 12:46 am #58456
    Klaus
    Participant
    • Topics: 3
    • Replies: 4

    Hi,

    I thought my clamping was off – but now I’ve found that it is my inclinometer that is off with approx. 1 deg. I’m not satisfied with this, 1 deg. is too much. Anybody else having this problem?

    Maybe I should ask for a replacement!

    03/11/2023 at 5:54 am #58457
    Klaus
    Participant
    • Topics: 3
    • Replies: 4

    OK – Just a little update.

    I’ve managed to tune the inclinometer to be spot on. I simply took a sheat of 800 grit dry/wet paper and grinded the sides of the inclinometers aluminium housing. Also put the inclinometer on a 100% level surface – and turned it around 180 deg. – and it is now spot on.

    If you have the same problem with your inclinometer I’ll gladly explain more detailed exactly how to solve this issue!

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.