Thanks for the feedback, all.
@ edhead35 and komitadjie,
Don’t let my test stop you from doing your own. If you did something similar, even if not as comprehensive, with instruments/reference standards that have better accuracies than the Cube, it might still demonstrate reproducibility, and that the entire population of Cubes can be trusted. I’m sure iGAGING will be thrilled to learn that we have given our stamp of approval. :silly:
I used it today to ensure that a 19″ instrument rack shelf was installed level and not one screw-hole off. Some instruments won’t tolerate a tilt angle (introduces an offset reading) unless it is calibrated at that angle, and I don’t feel like doing that!
