The best trick to clamp the FFG blades such as the Spyderco Military is to use a narrow strip of 3M double stick the stuff that’s about 1/16″ thick. Cut a strip 3/32″-1/8″ and stick it at the top of each clamp jaw. A little care in getting the blade vertical as you tighten the top and then the bottom till the gap is parallel. Very solid and doubles to not mark the blade. Sometimes I fold the handle vertical 90 degrees to the blade to check the set-up with a square on both sides of the handle. The double stick idea came from Clay and the really nice young lady that answers the phone, very knife knowledgeable.
CAW
