Reply To: Any tips on sharpening a Sandrin tungsten carbide blade
...Hmm, I don’t know, maybe my problem was mixing them up? I was mainly using edge-leading strokes to knock off burrs. And they would dull my edges. I stopped... »
...Hmm, I don’t know, maybe my problem was mixing them up? I was mainly using edge-leading strokes to knock off burrs. And they would dull my edges. I stopped... »
...films, etc. Home – Sandrin Knives USA Sandrin sharpening video- Sharpening a Sandrin Tungsten Carbide Blade – YouTube Hi Glenn. I’m curious to know if you were using edge-leading strokes.... »
...Edge leading strokes will probably slash lapping films. Do to the nature of the thin plastic-like film, edge trailing, that is up and off strokes, like used with strops... »
...of folded creased paper towel to feel for the burrs. I feel for the burrs with the creased part of the paper towel. I also don’t use edge leading strokes... »
...burrs with the creased part of the paper towel. I also don't use edge leading strokes except for the scrubbing strokes to reach burrs on each side and/or to remove... »
...doing it. https://youtu.be/t4lFuijANVU he talks about tough lapping films Edge leading strokes will probably slash lapping films. Do to the nature of the thin plastic-like film, edge trailing, that is... »
...Edge leading strokes are done by bringing or pulling the stones down and onto, or down and against the knife edge. (Apex down to bevel shoulder). Edge trailing strokes... »
...up to the apex then off the edge). Both of these strokes, edge leading, and edge trailing strokes can be done either in a heel to tip direction or in... »
...Good stuff here and I’m replying to simply resurrect this thread to see if anyone has any updates. Edge-leading, trailing, and -parallel strokes.. hmmmm good stuff. my $20 scope... »
...appear. Yet alas, I grind and grind, edge leading, edge trailing, scrubbing, cross cross to try and introduce “smaller areas that need to be broken off”. I’d flip the stone... »
Wicked Edge Precision Knife Sharpener © All rights reserved.