Case for Gen 3 Pro

[Scott Morgan]

Any plans for a hard case for the new Gen 3 Pro?

[wickededge]

Any plans for a hard case for the new Gen 3 Pro?

This is in the works now. We’re just waiting on a sample of the new foam for the Gen 3 Pro to go into the hard cases. Once we get the sample and approve it, we’ll get some into production.

-Clay

[Aaron]

Excellent! I would be interested in one of these as well. The feedback I am getting from knives sharpened on my Gen 3 Pro has been outstanding!

[David Hill]

Will it fit in the old gen 2 case with the new foam?

Davidghemail

[wickededge]

Will it fit in the old gen 2 case with the new foam?

Davidghemail

Yes, it’s the same case with different foam.

-Clay

[Jeremy Liskey]

Will it fit in the old gen 2 case with the new foam?

Davidghemail

Yes, it’s the same case with different foam.[/quote]
For those interested, what would be the best way to order one?
I would need foam and case as well.

[Mark76]

Welcome to the forum, by the way, MorgueMD.

Molecule Polishing: my blog about sharpening with the Wicked Edge

[Scott Morgan]

Thanks, just a novice here, but the WE Pro ten 3 makes sharpening up my dull kitchen knives easy.

1 user thanked author for this post.

dulledge

[wickededge]

Will it fit in the old gen 2 case with the new foam?

Davidghemail

Yes, it’s the same case with different foam.[/quote]
For those interested, what would be the best way to order one?
I would need foam and case as well.[/quote]

Once they’re ready, we’ll have them on the site for sale or you’ll be able to call in for one. We’re anticipating 4 weeks until they’re complete.

-Clay

[Aaron]

Can anyone provide me with the dimensions/specs/model of the existing case? The photo on the WE website was a bit small and hard to read. I may wait for the updated one to be released, or may source my own to accommodate the extras that I want to fit and take with me. Thanks in advance!

[wickededge]

Can anyone provide me with the dimensions/specs/model of the existing case? The photo on the WE website was a bit small and hard to read. I may wait for the updated one to be released, or may source my own to accommodate the extras that I want to fit and take with me. Thanks in advance!

Here’s a link to the specs: http://www.plasticase.com/gestion/pdf_en/940-0.pdf I’m not sure why the image is now showing so small. It should be much bigger. Yet another mystery to investigate…

-Clay

[wickededge]

Here’s a photo of the case prototype with the sharpener in it:

Attachments:

• Gen-3-Case-Proto.jpg

-Clay

1 user thanked author for this post.

dulledge

[Alan]

Wow. I didn’t think the full Gen 3 Pro would fit. Looks great! There is room for other things, looks like. I assume the item in the top right is for the angle cube? I’ve always thought a case that had a place for some blue painters tape would be nice, since that is something we almost always use. Looks like the painters tape could fit right inside the shelves of the unit, among other items. Nice job, clay! Pretty sure I’m gonna have to get one.

Alan

[wickededge]

That is the spot for the Angle Cube. The painter’s tape would probable fit in the slot directly above the jaws.

-Clay

[Jeremy Liskey]

Very nice! I don’t suspect it would be difficult to DIY a slot for the low angle adapter?.

[Author]

Posts